Introduce your cat to the flap prior to when it's set up so they can be familiar with the size and shape. The flap should be opened and let them explore it from all angles.
Make sure the cutout is square and even. Mark the screw holes and align them with the cat flap opening. The distance between the edges should be equal.
Preparation
Having a cat flap installed in your home can be beneficial for the health and wellbeing of your pet. It will allow your pet to move from inside to the outside, without having allow them to enter or leave. It also stops them from fighting over cat food, litter boxes or the entrance to the home.
Set up the area where you'll be installing your cat flap before you begin. It will be much easier to work if you remove any obstructions. You will also want to take away any furniture or other decorations that could hinder your work.
In preparing the area it is important to take measurements and mark the location where you intend to put the cat flap. This will allow you to avoid making a mistake that could ruin the wall or door. It is best to put the cat flap in a place that is easily accessible to your cat, yet doesn't affect the structural integrity of your home.
A great place to put the cat flap is in an entrance that leads to an enclosed space like your laundry room or closet. This will stop the cat from jumping over it and allows you to keep the cats safe from any possible dangers. The flap should be low enough for your cat's smallest to use, since larger cats might struggle to climb over the flap.
If you have a sliding patio door or an old-fashioned sash window, it could be best to employ an expert handyman for the task. It isn't easy to install an animal flap on these doors and windows and any mistakes could lead to costly damage. A professional can install the cat flap without damaging the door or window's structural integrity.
To mark the space for the cat flap, you'll need a ruler or a tape measure to determine the height of your cat's belly from the floor. This will enable you to precisely cut the flap's opening. Once you have the line marked, use a spirit level to ensure it is horizontal. Then, go through the directions that came with the cat flap kit to find the template. Attach it to the door so that the bottom edge of the template coincides with the horizontal line you have drawn and is aligned with the center point of the door.
Measurement
A cat flap, sometimes referred to as pet doors is a small opening in the bottom of your exterior doors or windows that allows pets to go inside and out of the home. You can choose from a variety of sizes and materials to find the right one for your pet and you.
Before you buy a cat flap, it is important to measure precisely the size of your window or door in which you're planning to put it. This way, you will be able to ensure that the hole will to be of the correct size and that the cat flap will fit. This method can be used to determine the width of the opening by cutting off a section of it and walking through it with your pet.
It is also advisable to measure the height of your cat from the floor to the lowest point on their belly. This will ensure the flap is installed in the right place for your cat to feel at ease. If it's too low, they could struggle to get through. If it's too high, they might not be capable of using the flap.
Generally you should aim to drill your holes at a 45 degree angle to the vertical surface. This will ensure the most secure and stable installation of your cat flap. If your cat flap kit didn't come with a spirit level, a straight edge can be used instead.
When putting the cat flap onto a glass or UPVC window or door, it's best to hire a professional glazier to do this for you. This is because these kinds of doors are typically made of toughened glass and drilling into them could damage the integrity of the glass and may cause it to shatter in the future, which could be a security risk for your home.
Putting a cat flap into brick walls can be a problem, too, since if you drill into a soft part of the wall, this could create problems for pipes and cables that run through the property. This could result in costly repairs or even leaks or weather damage caused by the outside.
Marking
Mark the hole where you need it after you have measured your cat. Utilizing your spirit level to ensure it is parallel to the door, then mark the centre point. If the template you have for the cat flap kit does not include the centreline, you can photocopy it. Then, use a pencil to trace around the template to indicate the location where the hole will be cut.
Remember, if the cat flap is too low, it can be difficult for your cat to go in and out of your house, and if the flap is too high, they could struggle to see what's going on outside. It is recommended to make it as close to your cat's belly as you can to give them the most comfort and security.
It is also important to be careful not to put the cat flap too close to the frame of a solid wall, as it could cause issues with damp, draughts and stability. If you're not familiar in masonry work it's beneficial to seek professional assistance.
Then then, open the door and encourage your cat or kitten to enter it by pointing them to where they need to go (it helps if there's someone on the inside to encourage them). Once they've done it, you can start letting them go in and out as you would like.
It is not advisable to push your kitten or cat through the flap too fast because it could cause them to become scared. The clunk, snap, and squeak of the door closing may cause injury to your cat or kitten. doors with cat flap repairmywindowsanddoors.co.uk will be even more scared if the tail gets stuck in the flap. Cats also are known to return home to check on any intrusions, so having the door open during this time could be a problem since it could lead to your pet being attacked by a cat that they know. This is the reason it's best to install a small cat flap and only if your cat or kitten is aware of using it.
Installation
Once the flap is in place, it is important to show your cat how to use it. It may take some time however, with patience and a few treats to encourage them to learn, they will eventually get hang of it. It is also possible to put a lock in the flap to provide security, particularly during harsh weather conditions or when you are away from the house.
The first thing you need to do is decide the location you'd like to place the cat flap inside your door. This will need to be placed in a spot that opens onto an area that is protected from the elements of your garden. This will allow your cat to feel more secure when they enter and exit the house and can also stop other animals from entering your home.
It is also important to consider the height of the flap for your cat. This should be in the same space as the measurement of your cat's belly to ensure that they will be able to pass through easily. You could also think about placing steps on either side of the door, to help your cat move through it with ease.
Once you've decided on where you'd like to put the cat flap then you can measure the door using a pencil and mark the location. This will help you determine the best place you will need to cut. Then, you will need to cut a square on the door using an jigsaw. Wear safety goggles and a dust mask, to keep your health safe from inhaling dust. After the square is cut and sanded, you can sand the edges of the door. This will create an even edge.
After you've finished sanding, now replace the cat flap inside your door. You should put the cat flap in such that the lock (if there is one) is on the inside of the door. Drill the screw holes in the event that there are any on the door. Then, carefully place the flap in the hole, making sure that it fits snugly.